The Freestanding Constant Force post is for use as a single point anchor
conforming to BS EN 795 Class E and can also be used as part of a Latchways
ManSafe horizontal cable system, which has been independantly tested.
The post is used on nominally flat roofs up to a maximum pitch of
5º where it is impractible to install traditional Constant Force posts
or rigid anchor posts to the roof or supporting structure. The post has been tested and approved
for use on concrete, single ply membrane, bitumen membrane, asphalt-sanded, asphalt-stone chipped and steel
roof profiles.
If the roofing profile which you have
selected falls outside the current range, please contact Latchways technical department on +44 (0) 1380 732700
for further advice. The interlocking segmets are arranged in a circular form, ensuring that the post is omni directional.
Each segment has an integral carry handle and is a maximum weight of 25 kg. Ensure no part of the anchor device
is less than 2.5 m from any roof edge including skylights, hatches etc. Where appropriate, remove any loose chippings
prior to assembling the post. When connecting to the post or system, always use a full body harness and energy absorbing lanyard to
appropriate national standards. The post must never be used during periods of adverse weather conditions
(i.e. frost, snow or freezing conditions) or if the roof surface is contaminated by algae, grease, oil or any other type
of lubricant.
Certification:
Before commissioning the Freestanding Constant Force post and issuing certification, the following checks
must be carried out; The anchor device is installed so that the rubber coated weights are always in contact with the roof.
The correct amount of segments have been used to assemble the post. The roof surface is an appropriate type as described
on the warning label and has been securely fitted to the post base plate. All bolts securing the D ring, Constant Force post, cross
straps and segments are tight. There is no damage to the post. There is no damage to the roof area immediately around the post.
The record card has been completed.
Solutions for aged, damaged or non-compliant vertical ladder climbing safety systems. Don't rely on cages alone! We have solutions for easy retrofit. Click here to contact our customer service department for assistance with these products.
Login Status
