Sample Fall Protection Plan

Fall Protection & Rescue Plan Example


Talk To A Fall Protection Expert

How Can We Help You?


FLS recommends using the following only as an example. Most sites will be more specific. The customer’s safety representative should develop a detailed plan.

6.1 BC Construction Industry Health & Safety Council Site Specific Fall Protection Plan

6.1.1 Employer Responsibilities

  • Ensure a written worksite specific fall protection plan is in place
  • Ensure that a fall protection system is being used
  • Ensure that guardrails are used when practicable
  • Ensure a fall restraint system is in place when applicable
  • If a fall restraint system cannot be used, ensure a fall arrest system is in place
  • Provide appropriate control zone procedures if the above are not appropriate
  • Ensure supervisors and workers are trained
  • Ensure all equipment is safe, maintained, inspected and used correctly
  • Investigate any anomalies in the system to make recommendations so that such anomalies will not happen again
  • Update the program as needed
  • Follow up on our program

6.1.2 Supervisor Responsibilities

  • Ensure the program is prepared for each site
  • Ensure the program is being implemented
  • Inspect the program as it is used
  • Review the program
  • Investigate any anomalies and make recommendations to prevent reoccurrence
  • Investigate all workers reports of anomalies to the system
  • Keep a log of all workers trained for the fall protection program and topics that were covered before they work in the fall protected area
  • Ensure all workers have a copy of the fall protection program
  • Inspect, maintain, and use the equipment in the recommended methods
  • Ensure that all workers are provided with the appropriate equipment
  • Observe workers, work practices and site operations and correct when necessary

6.1.3 Worker Responsibilities

  • Know the fall protection plan
  • Follow the procedures as trained
  • Inspect equipment
  • Maintain equipment
  • Report any anomalies to the supervisors
  • Ensure the equipment is used as the manufacturer recommends
  • Inspect the program
  • It is a condition of employment that all managers, supervisors, and workers comply with the company safety policy and safety programs

6.1.4 Company Policy Statement

Company Name and Address:
We at ______________ believe that our employees are very important to us. Fall Protection is an important aspect of our program to insure that people who work for us can continue to live safe and healthy lives. We at ______________ require all employees who work at heights above 10 feet and over to be protected from falling. In some cases, we will also implement fall protection at a lesser height if there is a danger or hazard in the area below. A written fall protection plan will be developed and implemented when a fall hazard of 25 feet or more exists or when a safety monitor and control zone is required.

The intent of the plan is to:

  • Help prevent falls
  • Assist workers and supervisors to identify the fall hazards of the site before work begins at heights.
  • Assist in the selection of an appropriate fall protection system(s)
  • Assist in rescue procedures for someone if a fall should occur

It is our company policy that all managers, supervisors and workers comply with the fall protection guidelines we have established. We have several checklists to help our supervisors and workers in identifying problem areas on the site. These checklists will be of much help when our supervisors are developing the site-specific program. We have outlined some specific responsibilities for ourselves (the employer), our supervisors and our workers as follows:

Signature of Management and Date

6.1.5 Site specific Fall Protection Work Program
Company: _______________________________________________________
Address: ________________________________________________________
Phone: __________________________________________________________
Date: ___________________________________________________________
Project: _________________________________________________________
Location: ________________________________________________________
Phone: __________________________________________________________
Date: ___________________________________________________________
Supervisor: ______________________________________________________
Site Safety Representative: __________________________________________
Job Description and Type of Work (circle one):
New      Alterations      Demolition      Maintenance      Repair
Specific Work Area:_______________________________________________
A brief description of the type of work being done:

 

 

Is a control zone used (circle one):     Yes       No
If yes, where: ___________________________________________________________
Is the control zone marked (circle one):     Yes       No
If yes, how: ___________________________________________________________
What is the set-back distance of the control zone area (circle one):    Meters        Feet

The Safety Monitor
Name of Safety Monitor: ___________________________________________
Safety Monitor Training: ___________________________________________
Date Trained: _______________
Number of workers to be monitored: __________________________________
Journeyman: _____________________________________________________
Apprentices: _____________________________________________________

All the following Workers have been trained in the Safety monitor system:
Date: _______________
1. __________________________________________________________
2. __________________________________________________________
3. __________________________________________________________
4. __________________________________________________________
5. __________________________________________________________
6. __________________________________________________________
7. __________________________________________________________
8. __________________________________________________________

Describe the type of work being done:

 

List the fall hazards:

 

Draw a diagram of the control zone:

 

Describe the type of fall protection system to be used:

 

Other considerations:

 

Describe the type of work being done in other fall hazard areas:

 

List the fall hazards:

 

Draw a diagram, if necessary:

 

Describe the type of fall protection system to be used:

 

Other considerations:

 

In detail, describe the procedure to be followed if someone is to be rescued after a fall occurs:

 

Other concerns or considerations:

Hazard Identification
Scaffold Work
Lock Out
Walls
Floor Openings
Edge of Slab
Electrical Hazards
Other Trades
Manholes
Shafts
Doors
Tripping Hazards
Drop Off Points
Fly Forms
Swing Stages
Excavations
Crane Operations
Work Access Above
Walkways Above

Type of Fall Protection Name:
Guardrails
Toe Boards
Horizontal Lifelines
Vertical Lifelines
Harness and Lanyard
Belt and Lanyard
Warning Lines
Cover Over Holes
Wire Rope Lifelines
Fiber Rope Lifelines
Robe Grabs
Fall Arrest Blocks
Tie Backs
Safety Nets
Canopies

Describe in detail all work procedures including hazard identification, assembly, maintenance, use, disassembly, and inspection of the equipment, system and/or area. Ensure all required equipment is provided, identified, inspected and put in a log book before use.

Equipment Log

 Equipment Name  Equipment #  Date Inspected  Date Removed
 Safety Belts
 Harnesses Safety Lines
 Lanyards
 Horizontal Lifelines
 Nets
 Platforms
 Rebar Guards
 Guardrails

 

All workers who will be exposed to fall hazards are informed of those hazards and are instructed in the fall protection system to be used and the procedures to be followed. All contents of this program have been conveyed to the workers. All necessary equipment has been provided.

Site Superintendent: _____________________________________________________
Signature: ____________________________________________________________
Print Name: ___________________________________________________________
Date: ________________________________________________________________
Site Safety Representative: _________________________________________________
Signature: ____________________________________________________________
Print Name: ___________________________________________________________
Date: ________________________________________________________________